Laboy ASS402440S Glass Penny Head Hollow Glass Stopper for 24/40 Outer Glass Joint Pack of 5

#ad
Laboy ASS402440S #ad - Hollow glass stopper. Pack of 5. Penny head hollow glass stopper with closed bottom, grounded, used for any apparatus with 24/40 standard ground taper outer joint. Penny-head joint stopper. Made by hand blowing. For 24/40 grounded interchangeable joint.

#ad



EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
EISCO CH0688 #ad - Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Can mount vertical or horizontal -- rotates on clamp. Extends out approximately 5" from rod, not adjustable. Attaches to rods up to 15 mm in diameter. Jaws have a capacity of 90 mm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

#ad



Laboy HMA012103-LB Thermometer Adapter Inlet Adapter with 24/40 Inner Joints for Distillation Apparatus

#ad
Beijing Chemduk Lab Equipment Co.,Ltd HMA012103-LB #ad - Attaches to rods up to 15 mm in diameter. Extends out approximately 5" from rod, not adjustable. Fit with thermometer or tubing. With a compression a cap. With a compression cap accommodates 5. 0-7. 5mm O. D thermometer use it as a syringe port. Can mount vertical or horizontal -- rotates on clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Made of borosilicate glass. With 24/40 standard taper inner joint, can be fit for any apparatus with 24/40 outer joint. With 24/40 inner joint. Made by hand blowing.

#ad



Dow Corning Vacuum Lubricant 5.3oz Tube

#ad
Dow Corning 77472132287 #ad - Designed for sealing and lubricating vacuum and pressure systems. Sealing vacuum and pressure systems. Resists oxidation and chemicals; no carbonaceous Attaches to rods up to 15 mm in diameter. Prevents fogging of delicate lenses. Made of borosilicate glass. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Made by hand blowing. With a compression a cap. Fit with thermometer or tubing. With 24/40 inner joint. Low vapor pressure, stiff, no melting silicone lubricant maintains its consistency from -40° to +204°C -40° to +400°F. Lubricating o-rings in binoculars and telescopes. Extends out approximately 5" from rod, not adjustable.

Dow Corning Vacuum Lubricant 5.3oz Tube #ad - Seals and lubricates chemical processing equipment. Can mount vertical or horizontal -- rotates on clamp.

#ad



Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set

#ad
EISCO #ad - Blue powder coated support stand base 8" x 5. 25". With a compression a cap. Attaches to rods up to 15 mm in diameter. Laboratory grade metalware Set - Support Stand 8" x 5. 25", stainless steel Rod 23" L, 045" dia. 10x1. 5 thread, Bosshead clamp 4. 25", 4 prong clamp and Retort Ring 2. 6" dia1 base, rod, 1 rod, 1 retort ringthis premium set includes a stand, 1 Bosshead Clamp 1 Cork Lined 4 Prong Clamp, clamps and ring, all in one package - eliminating the need to piece together a system for your classroom or lab.

Lubricating o-rings in binoculars and telescopes. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Made by hand blowing. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set #ad - . Perfect setup for a lab. Sealing vacuum and pressure systems.

#ad



Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article

#ad
Lucksender #ad - Attaches to rods up to 15 mm in diameter. Seals and lubricates chemical processing equipment. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp. Prevents fogging of delicate lenses. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Lubricating o-rings in binoculars and telescopes. Perfect setup for a lab. Blue powder coated support stand base 8" x 5.

Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article #ad - 25". With a compression a cap. Fit with thermometer or tubing. Sealing vacuum and pressure systems.

#ad



Laboy ASCS002440S Polyacetal Conical Joint Clips for 24/40 or 24/29 Standard Taper Glass Joint Pack of 10

#ad
Laboy ASCS002440S #ad - Withstand temperatures up to 302F 150C. Can mount vertical or horizontal -- rotates on clamp. For 24/29, 24/40 standard taper joint. Extends out approximately 5" from rod, not adjustable. Pack of 10 With 24/40 inner joint. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Attaches to rods up to 15 mm in diameter.

4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Lubricating o-rings in binoculars and telescopes. Used to connect a 24#the largest diameter for the joint is 24mm inner taper joint and a 24# outer taper joint. Sealing vacuum and pressure systems.

Laboy ASCS002440S Polyacetal Conical Joint Clips for 24/40 or 24/29 Standard Taper Glass Joint Pack of 10 #ad - Prevents fogging of delicate lenses. Seals and lubricates chemical processing equipment. Fit with thermometer or tubing. Made by hand blowing. With a compression a cap.

#ad



Laboy HMF010326 Glass Single Neck Round Bottom Boiling Flask 500 mL with 24/40 Joint

#ad
Laboy HMF010326 #ad - Can mount vertical or horizontal -- rotates on clamp. Seals and lubricates chemical processing equipment. For 24/29, 24/40 standard taper joint. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Fit with thermometer or tubing. Round-bottom flasks also called round-bottomed flasks, round bottom, Flasks, or RB Flaskshaving spherical bottoms are more resistant to fracturing under vacuum, as a sphere more evenly distributes stress across its surface.

Made of polyacetal. The flasks are usually used in heating or boiling a liquid, in distillation as distilling flasks and receiving flasks for the distillate, used as the distilling flasks in rotary evaporators. Capacity of 500Ml. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Laboy HMF010326 Glass Single Neck Round Bottom Boiling Flask 500 mL with 24/40 Joint #ad - Made by hand blowing. Round bottom flask. Stainless steel rod 23" length, 045" dia. 10-1.

#ad



Laboy HMF011435 Glass 1000 mL 3 Neck Round Bottom Boiling Flask with 24/40 Center and Side Joints Angled

#ad
Laboy HMF011435 #ad - Sealing vacuum and pressure systems. With 24/40 inner joint. Attaches to rods up to 15 mm in diameter. Can mount vertical or horizontal -- rotates on clamp. With 24/40 joint. Seals and lubricates chemical processing equipment. Round bottom flask. With a compression a cap. Lubricating o-rings in binoculars and telescopes.

With 2 necks having the same joints laboy glass flasks are heavy wall designed, made by hand-blowing to ensure uniform wall thickness, made of high-quality borosilicate glass and annealed at 800 degree Celsius, can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling.

Laboy HMF011435 Glass 1000 mL 3 Neck Round Bottom Boiling Flask with 24/40 Center and Side Joints Angled #ad - Extends out approximately 5" from rod, not adjustable. Made of polyacetal. This multi-neck flask has three standard taper ground joint. Pack of 10 . Made by hand blowing. Not resistant to the corrosive gases. Withstand temperatures up to 302F 150C. Fit with thermometer or tubing.

#ad



Laboy HMF030105 Glass Powder Funnel with 100 mm Top O.D. and 24/40 Inner Joint Filter Funnel Glass Funnel

#ad
Laboy HMF030105 #ad - Pack of 10 Can mount vertical or horizontal -- rotates on clamp. Perfect setup for a lab. Withstand temperatures up to 302F 150C. Extends out approximately 5" from rod, not adjustable. Round bottom flask. Made by hand blowing. Made by hand blowing. Made of polyacetal. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4.

25". Metal retort ring 2. 6" diameter. 3 neck angled. The glass powder funnels have 60° side angle and a standard taper inner joint. Capacity of 500Ml. With 24/40 joint. Not resistant to the corrosive gases. Round bottom flask. Lubricating o-rings in binoculars and telescopes. With 24/40 inner joint. Seals and lubricates chemical processing equipment.

Laboy HMF030105 Glass Powder Funnel with 100 mm Top O.D. and 24/40 Inner Joint Filter Funnel Glass Funnel #ad - Powder funnel. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

#ad



Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2

#ad
Soccerene #ad - With 24/40 inner joint. Pack of 10 Give our product a try by ordering today. Capacity of 500Ml. Description:*flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm. The flask support is made of high quality cork, strong heat and electrical insulation, it has very good elasticity, friction resistance.

Flask support is non-toxic, not easy to get fire, tasteless, small proportion, eco-friendly product. Waterproof and acid-alkli resistant. Perfect for holding your flasks or other spherical bottom containers from failing easily. To provide you best shopping experience, all of our items are fulfilled by Amazon.

Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad - Can mount vertical or horizontal -- rotates on clamp. Round bottom flask. Sealing vacuum and pressure systems. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Heavy wall design.

#ad