Smart-Bit Pro Plug System Countersink Drill Bit Tool for Wood Decks, Flooring, and Woodworking

The smart-bit pro plug system makes plugging IPE decks fast & easy. The glue nozzle works with most waterproof wood glues such as Elmer's Waterproof Wood Glue or Titebond. For easy install make sure to have a corded power drill, 1 STUB BIT, wood glue and hammer or mallet on hand. For best results, view the pro plug tool life photo- this will give you an idea of how many tools are needed to complete your job.

Pre-drills and counterbores perfectly- the patented number 8 pro plug tool for wood creates a screw hole and countersinks all in one step. Used together, the pro plug tool and pro plug plug & Fastener System results in a beautiful, high end IPE plugged deck in half the time. Warning: bits can become very hot during normal use.

Engineered to create a perfect looking & fitting result. The tool is designed for use with the Pro Plug System for wood by Starborn Industries. Cuts through decking and flooring more than 2x as fast as standard wood bits- the drill bits feature Powerbolic fluting, enabling the bits to bore twice as fast, speeding up installation.

The hole is complete when the stop collar stops spinning. One tool will work for 100 sq ft of ipe or Cumaru but the same tool will last for 200 sq ft of Meranti or Red Balau. Additional replacement bits may be purchased separately. To reduce risk of injury, follow the instructions of your power tool manufacturer and use safety glasses.




100 pc Component Pack Plugs Only 5/16" Diameter - PRO-PLUG System - for IPE

The plugs contained in this pro Plug System Component Pack are for use with the Pro Plug System for Wood and its components. Includes 100 #8 ipe pro Plugs 5/16" diameter. Now available on amazon in multiple species including Ipe, Cambara, Tigerwood and Meranti! Make plugging fast and easy. These plugs should only be used with the Pro Plug System and the Pro Plug Tool.

This component pack contains the plugs only*. For use with the Pro Plug System for Wood.


5 Pack of Bits Bda261c - Pro Plug #8 Replacement Bits For Use with Pro Plug System Tool

Replacement bits for the Smart-Bit PRO-PLUG Tool. This component pack contains the plugs only*. For use with #8 8. 5mm pro-plug Tools. Contains 5 standard Size Replacement Drill Bits. For use with the Pro Plug System for Wood. Part of the smart-Bit PRO-PLUG System. Overall hole depth, including Countersink Portion is 1-1/2" 38mm.

Includes 100 #8 ipe pro Plugs 5/16" diameter. Starborn Pro Plug 0125 l stainless steel Drill Bit Hex Shank 5 pc. Make plugging fast and easy.


100 Sq Ft with #8 x 2-1/2" Screws - Starborn Industries IPE Pro Plug System For Wood Decking Kit

Engineered to create a perfect looking & fitting result. Additional replacement bits may be purchased separately. The smart-bit pro plug system makes plugging IPE decks fast & easy. Part of a system, the pro plug plug & fastener kit for IPE contains uniquely designed IPE plugs, stainless steel screws, star drive bits and the revolutionary glue nozzle.

Pro plug ipe plugs have a unique design which combines the best of flared and straightwall designed plugs. Make plugging fast and easy. Pro plug glue nozzle works with most waterproof wood glues such as Elmer's Waterproof Wood Glue or Titebond. The smart-bit pro plug tool for wood contains one Smart-Bit Tool, 2 replacement bits, 1 stub bit and an allen wrench.

The pro plug tool is used to prepare the decking for the IPE plugs. Use with the smart-bit pRO PLUG Tool for Wood Sold separately. Revolutionary glue nozzle coats the sides of the countersink hole. This component pack contains the plugs only*. Overall hole depth, including Countersink Portion is 1-1/2" 38mm. Drill, screw, glue & Plug in under 20 seconds.

Replacement bits for the Smart-Bit PRO-PLUG Tool.


Pws08133010 - Starborn Pro Plug System Wood Deck Kit with 100 Ipe Plugs, 2-1/2" SS Screws, Nozzle and Bit

Includes 100 #8 ipe plugs 5/16" diameter, 100 #8 x 2-1/2" stainless steel screws. For use with the Pro Plug System for Wood. This component pack contains the plugs only*. Replacement bits for the Smart-Bit PRO-PLUG Tool. The kit contains uniquely designed IPE plugs, stainless steel screws, 1 star bit and the revolutionary new PRO PLUG glue nozzle.

The glue nozzle works with most waterproof wood glues such as Elmer's Waterproof Wood Glue or Titebond. Ideal for starter & end boards. Engineered to create a perfect looking and fitting result. 8 x 2-1/2" stainless steel screws included - Covers approx 100 sq feet. Overall hole depth, including Countersink Portion is 1-1/2" 38mm.

The smart-bit pro plug system makes plugging IPE decks fast and easy. Used together, the pro plug tool and pro plug plug and Fastener System results in a beautiful, high end IPE plugged deck in half the time. Use with pro-plug Tool for wood sold separately. Part of the smart-Bit PRO-PLUG System. Unique ipe plugs offer easy insertion & extremely tight fit plugs are 5/16" in diameter.

The pro plug plug and fastener Kit for IPE is the second part of the system. All you need to get started is a pro plug tool for wood and a PRO PLUG Plug and Fastener Kit for IPE along with a bottle of waterproof wood glue and a few simple tools.


PRO-PLUG System - Glue Nozzle Component Pack - 1 Replacement Pro Plug Glue Nozzle

This component pack contains the glue nozzle*. Make plugging fast and easy. For use with the Pro Plug System for Wood. 1 x replacement Pro Plug Glue Nozzle. Ideal for starter & end boards. Unique ipe plugs offer easy insertion & extremely tight fit plugs are 5/16" in diameter. Replacement bits for the Smart-Bit PRO-PLUG Tool.

Use with the smart-bit pRO PLUG Tool for Wood Sold separately. This component pack contains the plugs only*. 1 pro-plug glue nozzle & 1 T-20 Star drive bit. Revolutionary glue nozzle coats the sides of the countersink hole. 8 x 2-1/2" stainless steel screws included - Covers approx 100 sq feet. Includes 100 #8 ipe pro Plugs 5/16" diameter.

Use with pro-plug Tool for wood sold separately. Overall hole depth, including Countersink Portion is 1-1/2" 38mm. Includes 100 #8 ipe plugs 5/16" diameter, 100 #8 x 2-1/2" stainless steel screws. Makes plugging IPE decks fast & easy. Drill, screw, glue & Plug in under 20 seconds. Part of the smart-Bit PRO-PLUG System.




DeckWise Ipe Seal Hardwood End Grain Sealant for Fresh Cut Board Ends or Turning Blanks 1-Quart

Contains 5 standard Size Replacement Drill Bits. This is a non-hazardous wax emulsion treat it with the same respect as paint DO NOT drink DO NOT breathe the liquid AVOID contact with eyes Make plugging fast and easy. Use with pro-plug Tool for wood sold separately. Ipe seal creates a bond that extends the life of each deck board.

Revolutionary glue nozzle coats the sides of the countersink hole. Replacement bits for the Smart-Bit PRO-PLUG Tool. One quart of end sealer covers approximately 500 square feet of decking. The sooner our sealer is applied to exposed end grain and face grain of turnings and carvings, the more effective the coating will be.

This component pack contains the plugs only*. Ideal for starter & end boards. 1 pro-plug glue nozzle & 1 T-20 Star drive bit. Protects the structural integrity of hardwood decking. One quart of end sealer covers approximately 500 square feet of decking. Application is recommended to the wood within 24 hours of cutting.

Unique ipe plugs offer easy insertion & extremely tight fit plugs are 5/16" in diameter. This component pack contains the glue nozzle*.


Cepco Tool BW-2 BoWrench Decking Tool

For use with the Pro Plug System for Wood. Contains 5 standard Size Replacement Drill Bits. For use with the Pro Plug System. 26 by 4-1/2 by 1-1/2-inches; 5-pounds. 1 pro-plug glue nozzle & 1 T-20 Star drive bit. 8 x 2-1/2" stainless steel screws included - Covers approx 100 sq feet. Replacement bits for the Smart-Bit PRO-PLUG Tool.

Easy application, Exceptional Results. Protects the structural integrity of hardwood decking. One quart of end sealer covers approximately 500 square feet of decking. Decking tool for one-person straightening of deck boards. Unique ipe plugs offer easy insertion & extremely tight fit plugs are 5/16" in diameter.

Drill, screw, glue & Plug in under 20 seconds. Includes 100 #8 ipe plugs 5/16" diameter, 100 #8 x 2-1/2" stainless steel screws. For use with #8 8. 5mm pro-plug Tools. Use with pro-plug Tool for wood sold separately. 24-inch handle closes 2-inch gaps; joins tongue and groove; can push or pull. This component pack contains the plugs only*.




Starborn SMART-BIT PRO PLUG System-IPE-Contractor Pack - 1050 pcs

Use with pro-plug Tool for wood sold separately. 8 x 2-1/2" stainless steel screws included. 26 by 4-1/2 by 1-1/2-inches; 5-pounds. Revolutionary glue nozzle coats the sides of the countersink hole. Used together, the pro plug tool and pro plug plug & Fastener System results in a beautiful, high end IPE plugged deck in half the time.

This component pack contains the plugs only*. Easy application, Exceptional Results. Replacement bits for the Smart-Bit PRO-PLUG Tool. For use with the Pro Plug System for Wood. Contains 5 standard Size Replacement Drill Bits. Part of the smart-Bit PRO-PLUG System. Makes plugging IPE decks fast & easy. Unique ipe plugs 5/16" diameter offer easy insertion & extremely tight fit.

All you need to get started is a pro plug tool for wood and a PRO PLUG Plug & Fastener Kit for IPE along with a bottle of waterproof wood glue and a few simple tools. Part of a system, the pro plug plug & fastener kit for IPE contains uniquely designed IPE plugs, stainless steel screws, star drive bits and the revolutionary glue nozzle.

The smart-bit pro plug system makes plugging IPE decks fast & easy. Protects the structural integrity of hardwood decking. One quart of end sealer covers approximately 500 square feet of decking.


Snappy Tools 5/16" Tapered Plug Cutter

Part of the smart-Bit PRO-PLUG System. The plug cutter fits in a quick change chuck 830806. Tight fit; no glue needed. For use with #8 8. 5mm pro-plug Tools. For use with the Pro Plug System. Replacement bits for the Smart-Bit PRO-PLUG Tool. 5/16" hex drive plug cutter. Makes plugging IPE decks fast & easy. Hardened steel for long life.

This 5/16" hex drive plug cutter maximizes the torque needed to bore into the hardest woods. 26 by 4-1/2 by 1-1/2-inches; 5-pounds. Unique ipe plugs offer easy insertion & extremely tight fit plugs are 5/16" in diameter. Custom size or adjustable size grippers available from manufacturer. Use with the smart-bit pRO PLUG Tool for Wood Sold separately.

Heavy-gauge steel construction. 24-inch handle closes 2-inch gaps; joins tongue and groove; can push or pull. Tapered sides and a chamfered end for easy start. Overall hole depth, including Countersink Portion is 1-1/2" 38mm. Make plugging fast and easy. Plug cutter fits in quick change chuck in a drill press.


DeckWise Ipe Oil Hardwood Deck Semi-Transparent 250 VOC Natural Finish 1-Gallon

Not available for sale in california scaqmd jurisdiction; la-eastern, riverside, la-western, orange, and san bernardino counties. Make plugging fast and easy. Thanks for your understanding. Description: 4 gallons of ipe oil - This Hardwood Deck Finish is an oil-based natural wood finish specifically designed for use on exterior hardwood decks.

Heavy-gauge steel construction. Tapered sides and a chamfered end for easy start. Custom size or adjustable size grippers available from manufacturer. 1 x replacement Pro Plug Glue Nozzle. For use with #8 8. 5mm pro-plug Tools. Plug cutter fits in quick change chuck in a drill press. 1 pro-plug glue nozzle & 1 T-20 Star drive bit.

8 x 2-1/2" stainless steel screws included - Covers approx 100 sq feet. Makes plugging IPE decks fast & easy. Important shipping Information: Ground Shipping ONLY. Perfect for all exterior hardwood and thermal wood surfaces including decking, fences and railings. Drill, screw, glue & Plug in under 20 seconds.

Restricted: ground shipping only: can nOT be shipped to California areas including but not limited to LA SCAQMD.