Top 10 CO2 Tank For Kegerator – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. Kegco

#ad

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

#ad
Kegco #ad - These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Single faucet draft beer tower: featuring a beautiful standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators.

The standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve. Standard metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. Includes empty 5 lb. Lever handle keg coupler: this nsf-approved kegco kt85d-l "d" system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.

The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg. Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
BrandKegco #ad
ManufacturerKegco #ad
Height12 Inches
Length20 Inches
Width10 Inches
Part NumberBF STCK-5T
ModelBF STCK-5T
Warranty1 Year

2. Homecraft

#ad

1/2 Barrels, 2.5-Pound CO2 Tank, 1/4, HomeCraft Black Stainless Steel Full-Size Kegerator Draft Beer Dispenser & Beer Cooler, Single Meter Regulator, Holds 1/6, Spring-Loaded Tap Dispenser

#ad
Homecraft #ad - 2. 5-pound c02 tank: kegerator comes with a 2. 5 lb. Co2 tank unfilled, which fits in the CO2 tank holder in the back exterior to help maximize refrigeration space. Spring-loaded tap: the 12-inch, black spring-loaded single tap tower allows for an easy pull and release dispense, pouring a consistent draft beer every time. Comes with two adjustable wire shelves for your favorite canned or bottle beverages.

Stylish design: the black stainless steel door gives it an elegant look and is featured with a hardtop pouring station, black tap tower, removable drip tray and chrome guardrail. Keg coupler: includes one american sankey "d" single tap system that stands up to heavy use and is specially designed with a lever handle that makes it more sturdy and reliable than other standard styled keg couplers. Easy mobility: four casters at the bottom allow for the fridge to be easily transported from room to room and front casters can be locked to ensure the unit does not roll on hard floors. Powerful cooling system: the adjustable thermostat has seven settings so you can keep it chilled to as low as 32 degrees, keeping a consistent temperature to keep your beer or other drinks ice cold.

Recessed door handle: the recessed door handle provides a flushed finish with the door and the insulated rubber gasket inside keeps the cold in and the heat out. Ft. Single-meter regulator: durable constructed regulator features a shut-off and pressure relief valve, along with an easy-to-read pressure gauge that measures the PSI outflow from CO2 tank to keg 0-60 PSI. Energy star efficient: trusted and backed by the DOE by being energy-efficient to help save costs - estimated at $32 yearly.
BrandHomecraft #ad
ManufacturerNostalgia Products #ad
Height33.5 Inches
Length20.08 Inches
Weight90.4 Pounds
Width24.8 Inches
Part NumberBK49BS
ModelBK49BS
Warranty1-year limited

3. Kegco

#ad

Kegco EBDHCK2-5T Deluxe Homebrew Two Tap Door Mount Kegerator Conversion Kit with 5 lb. Aluminum CO2 Tank

#ad
Kegco #ad - This kit comes with two sets of ball lock keg couplers that each include both a gas in and a beer out coupler to allow you to easily tap Cornelius Pepsi home brew kegs. Aluminum co2 tank made from high strength aluminum alloy with a glossy red coating that acts as an extra layer of protection against corrosion and wear.

Includes a brand new empty 5 lb. The two nsf-approved beer faucets feature forged brass bodies with highly polished chrome finishes, brass shaft assemblies and levers with non-stick ball washers, and black ABS plastic faucet knobs. Durably constructed to deliver a consistent flow pour after pour, the dual gauge regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg.

The 10" wide door mounted drip tray features a clean design and reliable stainless steel construction, and it can be easily installed using the two conveniently placed screw holes on the backsplash.
BrandKegco #ad
ManufacturerBeverage Factory #ad
Height30 Inches
Length15 Inches
Width15 Inches
Part NumberEBDHCK2-5T
ModelEBDHCK2-5T
Warranty1 Year

4. Kegco

#ad

Standard, Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank

#ad
Kegco #ad - This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line. Chrome beer faucet with brass lever: featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.

The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve. Pro series dual gauge regulator: easily measure psi and co2 volume and adjust co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Ball lock keg couplers: this complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs.

The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. Includes empty 5 lb. Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. Standard metal beer faucet wrench: this beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
BrandKegco #ad
ManufacturerKegco #ad
Height10 Inches
Length18 Inches
Weight10 Pounds
Width10 Inches
Part NumberBF SHCK-5T
ModelBF SHCK-5T
Warranty1 Year

5. Kegco

#ad

Kegco EB2PSCK-5T 2 Faucet Premium Door Mount Kegerator Kit with 5 lb. Co2 Tank

#ad
Kegco #ad - 100 percent stainless steel contact: all the metal components that your beer will come in contact with are high quality stainless steel. Perlick perl beer faucets: these perlick beer faucets have a revolutionary ball and floating front seal design. Durably constructed to deliver a consistent flow pour after pour, this Kegco 762-2 commercial grade dual gauge. Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. Door mount stainless steel drip tray: our popular 10 inch.
BrandKegco #ad
ManufacturerBeverage Factory #ad
Part NumberEB2PSCK-5T
ModelEB2PSCK-5T

6. Kegco

#ad

Kegco HBK209S-2 Keg Dispenser, stainless steel,2 Faucet without Kegs

#ad
Kegco #ad - The two included adjustable shelves can be placed far enough apart to hold gallon jugs or 2-liter bottles. Please note: this is a homebrew kegerator and includes ball lock keg couplers for home brew kegs; it will not tap commercial D system kegs. A dishwasher safe drip tray sits under the faucet to help catch drips and spills, or to make cleaning more convenient. The adjustable mechanical temperature control is easily accessed at the back of the unit.

Powerful and energy efficient cooling technology: thermostatic temperature control lets you keep this keg cooler in the range of 35 degrees Fahrenheit to 42 degrees Fahrenheit, allowing you to adjust the temperature to best suit the type of beer you'll be dispensing. Standing on four locking casters, this kegerator is easy to relocate around your home for parties and get-togethers, helping to prevent spillage and knocked over glasses. Includes complete keg tapping kit: with the direct draw kit included with this kegerator, all that will be left up to you is to fill the CO2 tank and provide the kegs of brew! The kit includes an upgraded dual faucet stainless steel draft tower, and a premium dual gauge regulator at no additional charge to you, a CO2 tank with a red corrosion-resistant coating, meaning you will get an extra $37 worth of value added to this kit.

Sleek and stylish design: a textured top surface and guard rail lines the top of the beautiful black cabinet with stainless steel door, and is dishwasher safe to make cleaning easy. When you're not using this kegerator to dispense delicious home-brewed beer, it can be easily converted into an all-refrigerator for extra food and beverage storage. This allows you to dispense from two kegs while keeping a third cool for later. This kegerator has a 25% more energy efficient design to deliver powerful cooling while saving you money each month.
BrandKegco #ad
ManufacturerKegco #ad
Height33 Inches
Length23.69 Inches
Weight96.8 Pounds
Width23.69 Inches
Part NumberHBK209S-2
ModelHBK209S-2
Warranty1 Year

7. Ivation

#ad

1/4 Pony Keg, Temperature Control, Ivation Full Size Kegerator | Dual Tap Draft Beer Dispenser & Universal Beverage Cooler | Mounted CO2 Cylinder, Drip Tray & Rail | Fits 1/2 Keg, 2 1/6 Kegs Black

#ad
Ivation #ad - Stunning dual-tap chrome tower | gorgeous 3” drink dispenser includes two-faucet tap, removable drip tray & guard rail to prevent spills | 15” High Tower Provides Ample Clearance to Accommodate Lager, Porter, IPA, Sleek Polished Chrome Finish, Weizen, Pilsner, Eye-Level Styling, Stout, Ale, Pint Glasses & More. Fast, powerful 34° refrigeration | indoor draft beer system keeps contents icy cold all season long with convenient 7-level temperature Control Knob | Cools to Average of Low 30s to Mid 40s to Ensure Minimal Foaming, Ideal Carbonation & Balanced Flavor | Energy-Efficient Design Saves You Money & Peace of Mind.

Serve ice cold draft beer at home | freestanding keg refrigerator & universal beverage cooler keeps up to 2 separate beers types on tap for Amazing Anytime Refreshment! | Fits a Standard Full-Size Half Barrel Keg 1/2, Pony Keg 1/4, Slim Pony Keg 1/4, Up to 2 Sixth Barrel Kegs 1/6 or 2 Cornelius Homebrew Kegs. Converts to a beverage cooler | no keg? no problem! | flexible features include 2 height adjustable wire shelves, Reversible Door, Soda, 5 Built-In Shelf Slots, Wine, Smooth-Rolling Caster Wheels & FDA Food-Safe Components | Enjoy Versatile Cooling & Storage for Beer, automatic defrost, Water Bottles & Beyond.

Co2 cylinder empty, man cave, gas lines, regulator, accessories & mount Gear for Storing Tank on the Rear of the Kegerator | The Ultimate Gift for Beer Lovers’ Birthday, Anniversary, Housewarming, Etc. Co2 tank with complete assembly | american "d" system sankey keg tapping kit comes with everything you need to get started! | includes 5lb.
BrandIvation #ad
ManufacturerIvation #ad
Height37.8 Inches
Length27.56 Inches
Weight66.14 Pounds
Width22.32 Inches
Part NumberIVBKADT491B
ModelIVBKADT491B

8. Kegco

#ad

Single Faucet, Kegco Kegerator Full Size Keg Refrigerator, D System, Stainless Steel

#ad
Kegco #ad - Long-lasting durability: this csa listed kegerator features a dispense kit made up of high-quality ul recognized components, ensuring superior long-lasting performance. Powerful and energy efficient cooling technology: specially designed for in-home use, these Kegco kegerators feature ultra-quiet performance and a 25% more energy efficient design that saves you money each month on your utility bill.

A removable recessed drip tray with plastic grill can be easily cleaned in the dishwasher, and an attractive chrome safety rail helps prevent glasses from sliding off of the top. When you aren't using it to dispense tasty glasses of cold draft beer, the keg refrigerator can be easily converted into a regulator refrigerator using the two included adjustable storage shelves, or quarter slim keg, pony, providing additional refrigerated storage for food and beverages. Thermostatic temperature control keeps the internal temperature in the range of 35 to 42 degrees Fahrenheit, and is easily adjusted using a mechanical control dial that can be conveniently accessed at the back of the unit.

Easy roll casters make it easy to move your beer dispenser from your bar to your patio, and they lock to prevent it from moving once it's in position. Includes complete keg tapping kit: this high-quality keg beer cooler comes complete with everything you'll need to dispense fresh draft beer straight from the keg - you just add the keg! The single faucet keg beer dispense system includes a brand new 5 lb. The co2 tank ships empty and will need to be filled locally. The unit measures 33. 25" h x 24" w x 25" D.
BrandKegco #ad
ManufacturerKegco #ad
Height33 Inches
Length23.69 Inches
Weight75.8 Pounds
Width23.69 Inches
Part NumberK209SS-1
ModelK209SS-1
Warranty1 Year

9. Kegco

#ad

Kegco 3P2SCK-5T Kegerator Kit, 2-Tap, Chrome

#ad
Kegco #ad - Co2 tank made from high strength aluminum alloy. Commercial grade Kegco double gauge regulator is durably built to ensure the perfect pour. Two high-quality kegco chrome plated brass faucets upgrade the look of your kegerator and ensure perfect flow. Durable metal beer faucet wrench allows you to loosen or tighten shank collars without damaging your faucets. Kegco kt85d-l d system keg couplers easily tap all North American D system Sankey kegs. Included in the kit is a lightweight 5 lb.
BrandKegco #ad
ManufacturerKegco #ad
Height12 Inches
Length18 Inches
Width10 Inches
Part Number3P2SCK-5T
Model3P2SCK-5T

10. Kegco

#ad

Kegco Kegerator 24" Wide Dual Tap Black/Stainless Steel Undercounter Beer Dispenser HK38BSU-2

#ad
Kegco #ad - Converts to refrigerator: converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments. Digital temperature display: Digital temperature control keeps temperature between 32-59 degrees Fahrenheit.

Large stainless steel interior: holds 1 full-size keg, 2 quarter slim kegs, 3 5 gallon commercial kegs, or 3 5 gallon home brew kegs. Includes 2-tap direct draw kit: premium x-cluSIVE dispense kit includes stainless steel tower, CO2 tank, regulator, keg couplers, drip tray, and cleaning kit. Built-in or freestanding use: Undercounter kegerator can be built into cabinetry to provide a seamless look in your kitchen or home bar.
BrandKegco #ad
ManufacturerKegco #ad
Height34.13 Inches
Length25 Inches
Weight115 Pounds
Width24 Inches
Part NumberHK38BSU-2
ModelHK38BSU-2
Warranty1 Year Parts & Labor / 5 Years Compressor (Parts Only)