As an Amazon Associate I earn from qualifying purchases.
EZDIY-FAB #ad - Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Vertical gpu bracket with rgb led effects, synchronizable rgb lighting via motherboard AURA, Mystic, G, d, r, please note : not support 4pin rgb header +12v, G, Fusion:Support M/B 3 pin RGB Header 5V, b, 12 volts can destroy LED.
Only supports PCIE 3.
EZDIY-FAB #ad - Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount.
Please refer to length spec image and confirm that there is enough space of your chassis. New designed bracket to vertically show off gpu. Supports pcie 4. 0/3. 0/2. 0/1. 0, compatible with rtx3090, rtx3070, rtx3060ti, RTX3080, rx6900xt, RX6800.
Phanteks #ad - Supports pcie3. 0/2. 0/1. 0, doesn't support PCIE 4. 0 . Vertically display a VGA Graphics card. Mudding might be required. Compatible with chassis with “open” PCI slot design.
EZDIY-FAB #ad - For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. Note:before buying, please confirm whether there is enough space inside the chassis to install.
The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
LINKUP #ad - Compatible with most 1, 2, and 3 slot graphic cards. Over 64gb/s bi-directional true pcie 4. 0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range.
Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. Re-engineered wires and connectors for PCIe 4. 0 85ohm applications for GPUs, M. 2 nvme ssD.
Heavy duty bracket to vertically show off gpu and water cooler. Compatible with gpu - rtx3090, b590, rtx3080, rx6900xT, RTX3060TI, Z590. Designed for most full/mid ATX tower with at least 7 available PCI slots. Newly revised pcie 4. 0 Some cases may require cutting of metal pieces to fit***.
Toptekits #ad - Modular, instantly adjustable design - The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots. If you use this product with a motherboard that supports PCI-E 4.
0, please enter into BIOS option and select PCI-E 3. 0 before installation. Showcase your graphics card – the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.
EZDIY-FAB #ad - Please refer to length spec image and confirm that there is enough space inside the chassis. Only supports PCIE 3. 0 Designed for most white atx case with at least 7 PCIE slots in the market, White metal bracket perfectly fit White case.
High quality material increases structural toughness and supports the large graphics card weight on the market. Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
Lian Li #ad - Bracket kit dimension: d180mm X W191. 5mm x h272. 5mm. Vertical gpu mount accessory for the O11D MINI. Vertical gpu bracket kit. Pci-e 4. 0 riser Cable White. Pcie riser cable : Gen 4. 0 .
Lian Li #ad - Vertical gpu kit for O11 Dynamic XL only. Pci-e 4. 0 x16 riser cable. Material: Steel. Not fit o11 dynamic or Mini. Expansion Slot: 4.
1. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adOnly supports PCIE 3.
More information #ad
0 With movable bracket, more flexible in using PC case interior space. Designed for most atx case with at least 7 PCIE slots in the market. Note: please check your case with enough space. The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-3528 RGB GPU Bracket-B-with new riser |
| Model | US-3528 RGB GPU Bracket-B-with new riser |
More information #ad
2. EZDIY-FAB
#adVideo Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White, EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder
#adPlease refer to length spec image and confirm that there is enough space of your chassis. New designed bracket to vertically show off gpu. Supports pcie 4. 0/3. 0/2. 0/1. 0, compatible with rtx3090, rtx3070, rtx3060ti, RTX3080, rx6900xt, RX6800.
More information #ad
High quality material increases structural toughness and supports the large graphics card weight on the market. Designed for most full/mid ATX tower with at least 7 available PCI slots. Supports most 1, 2, and 3 slot graphic cards. Thanks to stretchable structure design, dp cable to your GPU without hassle, you would be able to connect HDMI, compatible to PC chassis with PCI grilles.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | YIHPI333-1 |
More information #ad
3. Phanteks
#adPhanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit
#adMore information #ad
Easy installation, placing tray over all seven PCI slot spaces. Pci slot required: 7. Included 220mm riser cable. Gpu support: Dual Slot GPU.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 6.5 Inches |
| Length | 9.5 Inches |
| Weight | 0.95 Pounds |
| Width | 6.5 Inches |
| Part Number | PH-VGPUKT_02 |
| Model | PH-VGPUKT_02 |
| Warranty | 2 year manufacturer |
More information #ad
4. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- White
#adThe latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
More information #ad
The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud. Only support PCIE3. 0 White color metal vertical mount fits white case perfectly.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | JP-Muti-VGA stand-W with new riser |
| Model | JP-Muti-VGA stand-W with new riser |
More information #ad
5. LINKUP
#adLINKUP Vertical GPU Mount Loop Bracket Graphic Card Holder with LINKUP Ultra PCIe 4.0 X16 Gen4 Riser Cable 90 Degree Right Angle 20cm Black Kit
#adPlease install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. Re-engineered wires and connectors for PCIe 4. 0 85ohm applications for GPUs, M. 2 nvme ssD.
More information #ad
No bsod, b550, rx6800 / chipset - x570, rtx3070, or wue / whea error free. Quality hand soldered gold-plated contacts for signal integrity. Some cases may have mis-align screw holes and may cause the gpu to be off alignment when installed, causing damage to the GPU and the system. Heavy duty bracket to vertically show off gpu and water cooler. Compatible with gpu - rtx3090, b590, rtx3080, rx6900xT, RTX3060TI, Z590. Designed for most full/mid ATX tower with at least 7 available PCI slots. Newly revised pcie 4. 0 Some cases may require cutting of metal pieces to fit***.
| Brand | LINKUP #ad |
| Manufacturer | LINKUP Technology Inc. #ad |
| Part Number | AVA-VGM-L009 |
More information #ad
6. Toptekits
#adFor Full Tower / Standard ATX Chassis with at Least 7 Available PCI Slots, Cooler Master Universal Vertical Graphics Card Holder KIT VER.2 with 165mm/6.5in Riser Cable
#ad0, please enter into BIOS option and select PCI-E 3. 0 before installation. Showcase your graphics card – the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.
More information #ad
Important note: this product is only compatible for devices that support the PCI-E 3. 0 specification. Durable, high quality materials - Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder. Compatible with all standard atx chassis - The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.| Brand | Toptekits #ad |
| Manufacturer | Toptekits #ad |
| Weight | 0.44 Pounds |
| Model | MCA-U000R-KFVK01 |
More information #ad
7. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable- White
#adHigh quality material increases structural toughness and supports the large graphics card weight on the market. Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
More information #ad
Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-GPU Vertical holder-W with new riser |
| Model | US-GPU Vertical holder-W with new riser |
More information #ad
8. Lian Li
#adLian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | Lian Li #ad |
| Height | 15 Inches |
| Length | 8 Inches |
| Width | 7.5 Inches |
| Part Number | O11DMINI-1W-4 |
| Model | O11DMINI-1W-4 |
| Warranty | 1 year |
More information #ad
9. Lian Li
#adLian Li O11DXL-1-4 PCI-E 4.0 Upright Display Card Kit for O11 Dynamic XL only Vertical Graphics Card Holder for O11D XL
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | Lian Li #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Weight | 0.3 Pounds |
| Width | 5.75 Inches |
| Part Number | O11DXL-1-4 |
| Model | O11DXL-1-4 |
| Warranty | 1 year |
More information #ad
