Weiler Narrow Face Wire Wheel Conflex Brush, Round Shank, Steel, Crimped Wire, 2-1/2″ Diameter, 0.014″ Wire Diameter, 1/4″ Shank, 3/4″ Bristle Length, 3/8″ Brush Face Width, 20000 rpm

#ad
Weiler Corporation 17614 #ad - Narrow face crimped wire wheels for light-duty brushing action. Weiler's brushes are permanently mounted on 1/4 inches steel stems, providing quick installation on chuck or collet. High rpm ratings provide faster finishing for the lowest cost-per-piece brushed. Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal.

Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

#ad



Weiler Wide Face Wire Wheel Conflex Brush, Round Shank, Steel, Crimped Wire, 2" Diameter, 0.0118" Wire Diameter, 1/4" Shank, 7/16" Bristle Length, 3/4" Brush Face Width, 20000 rpm

#ad
Weiler Corporation 17619 #ad - Covers broader surface area. High rpm ratings provide faster finishing for the lowest cost-per-piece brushed. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal. Weiler's brushes are permanently mounted on 1/4 inches steel stems, providing quick installation on chuck or collet.

Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal.

#ad



DEWALT Wire Brush, Knotted, 1-Inch DW4902

#ad
Dewalt DW4902 #ad - Constructed with internal holding plate to ensure consistency and safety. Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal. Wire is 100% inspected to meet demanding quality specifications. Even balance which provides smooth performance. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

Wire length of. 020-inch with 1/4-Inch stem. Dewalt 1" x 1/4" hp. 020 carbon knot wire end brush - DW4902 Covers broader surface area.

#ad



Flared Crimped Wire End Wire Brush, Steel

#ad
Weiler 10035 #ad - Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal. Wire is 100% inspected to meet demanding quality specifications. Wire length of. 020-inch with 1/4-Inch stem. Power Tools and Accessories. 014 in. Rpm 22, 000, wire Dia.

Covers broader surface area. Crimped wire End Brush, Brush Dia. Shank size 1/4 In. Overall Length 3 In. Constructed with internal holding plate to ensure consistency and safety. Manufacturer: Weiler. Even balance which provides smooth performance. Fill material Carbon Steel, Max. 1-1/4 in. Trim length 7/8 In. Country of manufacture: United States.

Flared Crimped Wire End Wire Brush, Steel #ad - Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal. 0 .

#ad



Forney 72733 Wire Wheel Brush, Coarse Crimped with 1/4-Inch Hex Shank, 2-1/2-Inch-by-.012-Inch

#ad
Forney 72733 #ad - Forney 72733 wire wheel brush, coarse crimped with 1/4-Inch Hex Shank, 2-1/2-Inch-by-. 012-inch covers broader surface area. Removes rust, scale and paint in hard to reach areas. Designed for easy access into narrow holes and confined areas. Power Tools and Accessories. Wire length of. 020-inch with 1/4-Inch stem.

Works with any power drill or pneumatic air drill. Crimped style for light to medium duty applications. Wire is 100% inspected to meet demanding quality specifications. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

Forney 72733 Wire Wheel Brush, Coarse Crimped with 1/4-Inch Hex Shank, 2-1/2-Inch-by-.012-Inch #ad - Even balance which provides smooth performance. Constructed with internal holding plate to ensure consistency and safety. 1/4-inch 6. 35-mm hex shank. Country of manufacture: United States. Manufacturer: Weiler. Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal.

#ad



Weiler Vortex Pro Wire Cup Brush, Round Shank, Carbon Steel, Crimped Wire, 2" Diameter, 0.014" Wire Diameter, 1/4" Shank, 5/8" Bristle Length, 13000 rpm Pack of 1

#ad
Weiler Corporation 36029 #ad - Crimped style for light to medium duty applications. Constructed with internal holding plate to ensure consistency and safety. Removes rust, scale and paint in hard to reach areas. 1/4-inch 6. 35-mm hex shank. Works with any power drill or pneumatic air drill. Even balance which provides smooth performance. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

Manufacturer: Weiler. Applicable for removing rust and paint from a variety of metal parts; deburring and cleaning id's and OD's on pipes, valves and fittings; cleaning and finishing recessed areas; rubber and plastic removal. High rpm ratings provide fast finishing in confined areas. Wire length of. 020-inch with 1/4-Inch stem.

Weiler Vortex Pro Wire Cup Brush, Round Shank, Carbon Steel, Crimped Wire, 2" Diameter, 0.014" Wire Diameter, 1/4" Shank, 5/8" Bristle Length, 13000 rpm Pack of 1 #ad - Country of manufacture: United States. Designed for easy access into narrow holes and confined areas. Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal. The vortec pro stem-mounted brushes are permanently mounted on 1/4" steel stems, providing quick installation on chuck or collet.

Power Tools and Accessories.

#ad



Weiler Circular Flared Wire End Brush, Round Shank, Steel, Crimped Wire, 1-1/2" Diameter, 0.02" Wire Diameter, 1/4" Shank, 20000 rpm Pack of 1

#ad
Weiler 10038 #ad - Power Tools and Accessories. Constructed with internal holding plate to ensure consistency and safety. 1/4-inch 6. 35-mm hex shank. Works with any power drill or pneumatic air drill. Applicable for removing rust and paint from a variety of metal parts; deburring and cleaning id's and OD's on pipes, valves and fittings; cleaning and finishing recessed areas; rubber and plastic removal.

General purpose applications on larger surface areas. Country of manufacture: United States. Accommodates the natural working angle; for broad range of surfaces and contours. Covers broader surface area. Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

Weiler Circular Flared Wire End Brush, Round Shank, Steel, Crimped Wire, 1-1/2" Diameter, 0.02" Wire Diameter, 1/4" Shank, 20000 rpm Pack of 1 #ad - Even balance which provides smooth performance. Wire is 100% inspected to meet demanding quality specifications. Removes rust, scale and paint in hard to reach areas. High rpm ratings provide faster finishing for the lowest cast-per-piece brushed. Manufacturer: Weiler.

#ad



Weiler Wire End Brush, Hollow End, Round Shank, Steel, Partial Twist Knotted, 3/4" Diameter, 0.02" Wire Diameter, 1/4" Shank, 22000 rpm Pack of 1

#ad
Weiler Corporation 10026 #ad - Also used for deburring, spot facing; weld, ID pipe and carbon cleaning; scale and slag removal. Rugged knot-type construction provides aggressive, high-impact action for severe applications. Weiler's brushes are permanently mounted on 1/4" steel stems, providing quick installation on chuck or collet. Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

Applicable for cleaning and finishing recessed areas of IDs; cleaning and polishing die, mold and tool; rust, paint, scale, slag and rubber/plastic flash removal. Also used for spot facing, weld, deburring, carbon and ID pipe cleaning. General purpose applications on larger surface areas. Crimped style for light to medium duty applications.

Weiler Wire End Brush, Hollow End, Round Shank, Steel, Partial Twist Knotted, 3/4" Diameter, 0.02" Wire Diameter, 1/4" Shank, 22000 rpm Pack of 1 #ad - Country of manufacture: United States. Manufacturer: Weiler. Covers broader surface area. Designed for easy access into narrow holes and confined areas. Works with any power drill or pneumatic air drill. Constructed with internal holding plate to ensure consistency and safety. Applicable for removing rust and paint from a variety of metal parts; deburring and cleaning id's and OD's on pipes, valves and fittings; cleaning and finishing recessed areas; rubber and plastic removal.

#ad



DEWALT Wire Brush, Crimped, 1-Inch DW4901

#ad
Dewalt DW4901 #ad - Accommodates the natural working angle; for broad range of surfaces and contours. 1/4-inch 6. 35-mm hex shank. Applicable for removing rust and paint from a variety of metal parts; deburring and cleaning id's and OD's on pipes, valves and fittings; cleaning and finishing recessed areas; rubber and plastic removal.

Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal. Works with any power drill or pneumatic air drill. This are highly durable. Applicable for cleaning and finishing recessed areas of IDs; cleaning and polishing die, scale, paint, mold and tool; rust, slag and rubber/plastic flash removal.

DEWALT Wire Brush, Crimped, 1-Inch DW4901 #ad - Also used for spot facing, weld, deburring, carbon and ID pipe cleaning. This are easy to use. Dewalt dw4901 brush wire end 1" Covers broader surface area. Removes rust, scale and paint in hard to reach areas. Constructed with internal holding plate to ensure consistency and safety. Even balance which provides smooth performance.

Power Tools and Accessories. General purpose applications on larger surface areas.

#ad



Zenith Industries ZN306030 Twist Knot Wire Wheel, 3" x .014" x 1/4"

#ad
Zenith ZN306030 #ad - Country of manufacture: United States. Its high speed rating allows it to be used with most air and electric die grinders never exceed maximum wheel RPM. Accommodates the natural working angle; for broad range of surfaces and contours. Applicable for cleaning and finishing recessed areas of IDs; cleaning and polishing die, mold and tool; rust, scale, paint, slag and rubber/plastic flash removal.

Also used for spot facing, weld, deburring, carbon and ID pipe cleaning. This are easy to use. Removes rust, scale and paint in hard to reach areas. This are highly durable. Wire is 100% inspected to meet demanding quality specifications. Works with any power drill or pneumatic air drill. Max rpm 25, 000 . Power Tools and Accessories.

Zenith Industries ZN306030 Twist Knot Wire Wheel, 3" x .014" x 1/4" #ad - Great for slag removal in weld seams and grooves. Even balance which provides smooth performance. Specifications size 3 inch x 1/4 inch shank Wire Diameter. 014 inch wire type carbon Steel Max RPM 25, 000

#ad



Weiler Standard Wire Wheel Brush, Round Shank, Steel, Partial Twist Knotted, 3-1/4" Diameter, 0.020" Wire Diameter, 1/4" Shank, 5/8" Bristle Length, 3/8" Brush Face Width, 25000 rpm

#ad
Weiler Corporation 17682 #ad - Quickly and easily removes rust, adhesives, gaskets and more. Great for slag removal in weld seams and grooves. Applicable for cleaning and finishing recessed areas of IDs; cleaning and polishing die, scale, paint, mold and tool; rust, slag and rubber/plastic flash removal. Also used for spot facing, deburring, weld, carbon and ID pipe cleaning.

This are easy to use. Manufacturer: Weiler. Wire is 100 percent inspected to meet demanding quality specifications. Works with any power drill or pneumatic air drill. Applicable for removing rust and paint from a variety of metal parts; deburring and cleaning id's and OD's on pipes, valves and fittings; cleaning and finishing recessed areas; rubber and plastic removal.

Weiler Standard Wire Wheel Brush, Round Shank, Steel, Partial Twist Knotted, 3-1/4" Diameter, 0.020" Wire Diameter, 1/4" Shank, 5/8" Bristle Length, 3/8" Brush Face Width, 25000 rpm #ad - This are highly durable. Crimped style for light to medium duty applications. Constructed with internal holding plate to ensure consistency and safety. Removes rust, scale and paint in hard to reach areas. Rugged knot-type construction provides aggressive, high-impact action for severe applications. General purpose applications on larger surface areas.

Applicable for cleaning and finishing recessed areas or ID; die, mold and tool cleaning and polishing; rubber and plastic flash removal; rust and paint removal.

#ad